Magnaloy Flexible Drive Couplings And Inserts

Product Description

Magnaloy Coupling Company has been manufacturing precision machined products since 1956, including the original light weight, heavy-duty flexible drive coupling.  Today, Magnaloy offers many products in addition to Flexible Drive Couplings including, Pump/Motor Mounts, Cylinder Rod End Alignment Couplers, Hydraulic Manifolds and Manifolding Accessories and Hydraulic Reservoirs.

Splined Couplings

* Magnaloy Couplings are available with a variety of special features which include splined bores. Many additional splined bores are available by contacting the factory, including straight sided "PTO" type splines and metric splines.

* The Clamp-Type Coupling utilized the basic Magnaloy coupling with the addition of the clamp feature. Developed to compensate for variations in spline formation methods and tolerances. Assures centering of the coupling and positive retention on the shaft. The clamp feature is suggested for all splined couplings, but is also available in smooth bored and keyed models.

* Magnaloy's Steel Bushed Splined Bore Coupling combines all the design and lightweight features of the Magnaloy Coupling with the added spline tooth strength and wear resistance of steel. Under normal conditions the standard "Splined Bore" coupling will perform satisfactorily and the addition of the "Clamp Feature" compensates for various fit conditions. When heavy cyclic loads, reverse loading and high torque loads exist in combination with fit variations, spline tooth failures and fretting can be corrected by utilizing Magnaloy's steel bushed coupling. Of course, to achieve optimum benefits, Magnaloy's clamp feature is recommended - assuring accurate centering and positive retention of the coupling on the shaft.

PM 90 Couplings

When your priorities for a coupling are economy and strength... specify the all-new Magnaloy Type PM90. The PM90 is made from high-density powdered metal and is available in standard bores up to 1 1/8 inch maximum. Double set screws are standard in all bores 1/2 inch and over. The set screws are placed over the keyway and at a 450 angle to the keyway to allow greater hoop-stress generation and maximum shaft gripping. Magnaloy's exclusive insert design allows easy installation and replacement without hub removal. The drive lug design provides even compressive loading with no radial loading of insert drive elements.

Magnaloy Couplings offer four-way flexibility (parallel, angular, axial and torsional) and require no lubrication. They are easily installed and properly aligned without use of special tools or equipment - a straight edge and hex wrench are the only tools required. Magnaloy's insert reduces noise and vibration and permits needed flexibility for proper operation within alignment capabilities.

Magnaloy Coupling's full range of flexible inserts permit custom design performance for a wide range of applications. All insert materials offer complete electrical insulation, as Magnaloy's design eliminates all metal-to-metal contact.